LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2016 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 29 (Fuel Injection System) >> Fuel >> Procedure >> Releasing Of Fuel Pressure

Releasing Of Fuel Pressure

WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:

Place "NO OPEN FLAMES" signs near the working area. 

CAUTION:

Be careful not to spill fuel. 

  1. Remove the fuse of fuel pump from main fuse box.
    G14601070Courtesy of SUBARU OF AMERICA, INC.
  2. Start the engine and run it until it stalls.
  3. After the engine stalls, crank it for five more seconds.
  4. Turn the ignition switch to OFF.
  5. Install the fuse of fuel pump to the main fuse box.
scientia non olet · About LEMON Manuals