LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2016 >> WRX Base >> Repair and Diagnosis >> Electrical >> Horns >> Horn System >> Horn Switch >> Inspection >> Check Roll Connector

Check Roll Connector

  1. Remove the roll connector. < Ref. to REMOVAL , Roll Connector. >
  2. Measure the resistance between connector terminals.

    Preparation tool: 

    Circuit tester 

    Fig 1: Measuring Resistance Between Roll Connector Terminals
    G10298731Courtesy of SUBARU OF AMERICA, INC.
    Terminal No. Inspection conditions Standard
    A1 - C9 Always Less than 1 Ω
  3. Replace the roll connector if the inspection result is not within the standard value.
scientia non olet · About LEMON Manuals