LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2016 >> WRX Base >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake System >> Rear Disc Rotor >> Installation >> STI Model

STI Model

NOTE: Before installation, remove mud and foreign matter from the disc brake assembly.
  1. Check the rear disc rotor. < Ref. to INSPECTION , Rear Disc Rotor. >
  2. Install the disc rotor.
    NOTE: When installing the rear disc rotor, match the alignment mark (a) of the rear disc rotor and the alignment mark (b) of the bolt - hub.
  3. Adjust the parking brake. < Ref. to ADJUSTMENT , Parking Brake Assembly (Rear Disc Brake). >
  4. Install the disc brake assembly.

    Tightening torque: 

    Mounting bolt: 65 N.m (6.6 kgf-m, 47.9 ft-lb) 

    Brake hose bracket: 33 N.m (3.4 kgf-m, 24.3 ft-lb) 

  5. Install the rear wheels.

    Tightening torque: 

    120 N.m (12.2 kgf-m, 88.5 ft-lb) 

scientia non olet · About LEMON Manuals