Front Sealing Cover: Installation
CAUTION:
- If the sealing cover - front door gets broken, replace it with a new part.
- Apply a uniform bead of butyl tape.
- Attach the sealing cover - front door, keeping it from becoming wrinkled.
- Breaks in the bead will allow water leakage and contamination.
- Install the sealing cover - front door.
- Forcefully push the butyl tape portion to prevent any floating on surface.
- When replacing the sealing cover, use the butyl tape.
Butyl tape:
3M Butyl Rubber 8626 or equivalent
- Install the trim panel - front door. < Ref. to INSTALLATION , Door Trim. >
- Connect the battery ground terminal. < Ref. to
BATTERY
, NOTE, Note. >NOTE: For models other than STI model, connect the ground terminal to battery sensor.