Starter Relay (Push Button Start): Installation
CAUTION:
Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". < Ref. to
CAUTION
, General Description. >
NOTE:
Make sure that there are no differences from the contents of the current settings after installation. < Ref. to
LIST
, Read Current Data. >
- Install the starter relay (push button start).
- Install the relay & fuse box and fuse holder.
Tightening torque:
Relay & fuse box: 7.5 N.m (0.8 kgf-m, 5.5 ft-lb)
- Install the knee airbag module.
Tightening torque:
7.5 N.m (0.8 kgf-m, 5.5 ft-lb)
- Install the cover assembly - instrument panel LWR driver.
- Connect the battery ground terminal. < Ref. to
BATTERY
, NOTE, Note. >NOTE: For models other than STI model, connect the ground terminal to battery sensor.