DTC C2548 Vehicle Dynamics Control Module System: DTC Detecting Condition
When error flag from VDCCM is detected for 2 seconds after the ignition switch is ON.
DIAGNOSTIC PROCEDURE
| Step | Check | Yes | No |
|---|---|---|---|
| 1 CHECK DTC. Read the DTC of VDC system using the Subaru Select Monitor. |
Is a DTC related to VDC system (sensors) detected? | Perform the diagnosis according to the DTC. < Ref. to LIST OF DIAGNOSTIC TROUBLE CODE (DTC) . > | Go to step 2. |
| 2 CHECK DTC. Using the Subaru Select Monitor, read all DTCs. |
Is a DTC related to CAN communication detected? | Perform the diagnosis according to the DTC. < Ref. to LIST OF DIAGNOSTIC TROUBLE CODE (DTC) . > | Replace the power steering control module. < Ref. to POWER STEERING CONTROL MODULE . > |