LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2016 >> WRX Base >> Repair and Diagnosis (Single Page) >> Electrical >> Gauges >> Instrumentation System & Driver Information Center >> Multi-function Display (MFD) >> Removal >> Multi-Function Display Switch

Multi-Function Display Switch

  1. Disconnect the ground cable from battery. < Ref. to BATTERY , NOTE, Note. >
    NOTE: For models other than STI model, disconnect the ground terminal from battery sensor.
  2. Remove the center grille assembly. < Ref. to CENTER GRILLE ASSEMBLY , REMOVAL, Air Vent Grille. >
  3. Release the claws and remove the switch - multi-function display.
    Fig 1: Identifying Multi-Function Display Switch Claws
    G10298804Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals