LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2016 >> Outback 2.5i >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Engine Lubrication System (H6DO)) >> Oil Pressure Switch >> Removal

Oil Pressure Switch: Removal

WARNING: This page is about a different variant/trim than selected.
CAUTION: If the engine oil is spilt over exhaust pipe or the under cover, wipe it off with cloth to avoid emission of smoke or causing a fire.
  1. Disconnect the ground terminal from battery sensor. < Ref. to BATTERY , NOTE, Repair Contents. >
  2. Remove the under cover. < Ref. to REMOVAL , Front Under Cover. >
  3. Drain the engine oil. < Ref. to REPLACEMENT , Engine Oil. >
  4. Disconnect the terminal from oil pressure switch.
    Fig 1: Locating Oil Pressure Switch Terminal
    G10264240Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the oil pressure switch.
    Fig 2: Locating Oil Pressure Switch
    G10264241Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals