LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2016 >> Outback 2.5i >> Repair and Diagnosis >> Engine Mechanical >> Engine Lubrication System (H4DO) >> Oil Pressure Switch >> Removal

Oil Pressure Switch: Removal

CAUTION: If the engine oil is spilt over exhaust pipe or the under cover, wipe it off with cloth to avoid emission of smoke or causing a fire.
  1. Disconnect the ground terminal from battery sensor. < Ref. to BATTERY , NOTE, Repair Contents. >
  2. Disconnect the connector (A) from the oil pressure switch, and remove the oil pressure switch from the chain cover.
    CAUTION: Catch the engine oil using cloth to prevent it from splashing.
    Fig 1: Locating Oil Pressure Switch Connector
    G10263073Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals