LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2016 >> Outback 2.5i >> Repair and Diagnosis >> Brakes >> Traction Control >> Vehicle Dynamics Control (VDC) System (Service Information) >> VDC OFF Switch >> Removal

VDC OFF Switch: Removal

  1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. < Ref. to BATTERY , NOTE, Repair Contents. >
  2. Remove the cover assembly - instrument panel LWR driver. < Ref. to REMOVAL , Instrument Panel Lower Cover. >
  3. Release the claws and remove the VDC OFF switch.
    Fig 1: Identifying VDC OFF Switch With Claw
    G10272390Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals