LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2016 >> Outback 2.5i >> Repair and Diagnosis >> Brakes >> Traction Control >> Vehicle Dynamics Control (VDC) System (Service Information) >> Relay and Fuse >> Inspection >> Check Relay

Check Relay

  1. Measure the resistance between relay terminals.
  2. Replace the relay if the inspection result is not within the standard value.
Terminal No. Inspection conditions Standard Circuit
1 - 2 Always 1 MΩ or more
G08585558Courtesy of SUBARU OF AMERICA, INC.
1 - 4 Always Less than 1 Ω
1 - 2 Apply battery voltage between terminals 3 and 5. Less than 1 Ω
scientia non olet · About LEMON Manuals