Sunroof Switch: Inspection

Measure the resistance between connector terminals.

Preparation tool:

Circuit tester

Fig 1: Sunroof Connector Terminal Identification

Courtesy of SUBARU OF AMERICA, INC.

Connector	Terminal No.	Inspection conditions	Standard
(a)	1 - 3	Open	Less than 1 Ω
(a)	4 - 3	Close	Less than 1 Ω
(b)	1 - 3	Tilt down	Less than 1 Ω
(b)	4 - 3	Tilt up	Less than 1 Ω

Replace the sunroof switch if the inspection result is not within the standard value.