LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2016 >> Outback 2.5i >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Blind Spot Detection System (Service Information) >> Radar Sensor >> Removal >> Radar Sensor LH (Master)

Radar Sensor LH (Master)

  1. Disconnect the ground terminal from battery sensor. < Ref. to BATTERY , NOTE, Repair Contents. >
  2. Remove the bumper face - rear. < Ref. to REMOVAL , Rear Bumper. >
  3. Remove the radar sensor LH (master).
    1. Disconnect the connector.
    2. Remove the nut and remove the radar sensor LH.
      Fig 1: Locating Radar Sensor LH Nuts And Connector
      G10273351Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the radar bracket.
    1. Remove the harness clamp. (OUTBACK model)
    2. Remove the nut and remove the radar bracket.
      Fig 2: Locating Harness Clamp And Radar Bracket Nuts
      G10311949Courtesy of SUBARU OF AMERICA, INC.