Without DTC: Trouble Symptom
- The STEERING warning light will not turn off.
- «No Diagnostic Code Present» will be displayed on Subaru Select Monitor.
NOTE:
When the STEERING warning light is OFF and «No Diagnostic Code Present» is displayed on Subaru Select Monitor when all DTCs are read, the system is operating properly.
DIAGNOSTIC PROCEDURE
| Step | Check | Yes | No |
|---|---|---|---|
| 1 CHECK LAN SYSTEM. Perform the diagnosis for LAN system using the Subaru Select Monitor. < Ref. to BASIC DIAGNOSTIC PROCEDURE . > |
Is DTC U0131 detected? | Perform the diagnosis according to DTC for LAN system. < Ref. to LIST OF DIAGNOSTIC TROUBLE CODE (DTC) . > | Go to step 2 . |
| 2 CHECK COMBINATION METER. Check the STEERING warning light when the ignition is turned from OFF to ON. |
Does the STEERING warning light illuminate at ignition switch ON, and turn off two seconds after the engine is started? | Finish the diagnosis. | Replace the combination meter. < Ref. to COMBINATION METER . > |