LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2016 >> Legacy 3.6R Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Starting System & Charging System (H4DO)) >> Battery Sensor >> Removal

Battery Sensor: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the ground terminal from battery sensor. < Ref. to BATTERY , NOTE, Repair Contents. >
  2. Remove the clip (A) from the battery holder.
  3. Disconnect the connector (B) from the battery sensor, and remove the battery sensor.
    Fig 1: Locating Battery Sensor Bolt
    G10263203Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals