Steering Wheel: Installation

CAUTION:

Before handling the airbag module, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Ref. to AIRBAG SYSTEM > General Description > CAUTION .
Be careful not to damage the curtain airbag module during removal.
If the steering wheel and steering angle sensor are removed, perform "VDC sensor midpoint setting mode" of the VDC. Ref. to VEHICLE DYNAMICS CONTROL (VDC) > VDC Control Module and Hydraulic Control Unit (VDCCM&H/U) > ADJUSTMENT .

Align the center position of the roll connector. Ref. to AIRBAG SYSTEM > Roll Connector > ADJUSTMENT .
Install each part in the reverse order of removal.
NOTE: Align the alignment marks on the steering wheel and the column assembly - steering.

Tightening torque:

Steering wheel: 39 N.m (3.98 kgf-m, 28.8 ft-lb)

Clearance:

Between cover assembly - column and steering wheel: 4 - 6 mm (0.16 - 0.24 in)