LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2016 >> Forester 2.5i, Eng CD FB25BA, Standard Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection (Fuel Systems) (H4DO) >> Camshaft Position Sensor >> Removal

Camshaft Position Sensor: Removal

  1. Disconnect the ground cable from battery.
  2. Remove the air intake duct (rear). (RH side only) Ref. to INTAKE (INDUCTION) (H4DO) > Air Intake Duct > REMOVAL .
  3. Disconnect the connector (A) from the camshaft position sensor, and remove the camshaft position sensor from the chain cover.
Fig 1: Identifying Camshaft Position Sensor Connector (RH Side)
G09475532Courtesy of SUBARU OF AMERICA, INC.
Fig 2: Identifying Camshaft Position Sensor Connector (LH Side)
G08315391Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals