Turbo Model

Remove the clip (A), lift the front of the collector cover in the direction of arrow, and then remove the collector cover.
1. Remove the clip (A).
2. Hold the shaded area (B) by hand and carefully pull the RH side (C) upward.
3. Hold the shaded area (D) by hand and carefully pull the LH side (E) upward.
Fig 1: Removing Collector Cover
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the ground cable from battery.
Remove the intercooler. Ref. to INTAKE (INDUCTION) (H4DOTC) > Intercooler > REMOVAL .
Disconnect the connector (A) and terminal (B) from starter.

Fig 2: Identifying Connector And Terminal Of Starter
Courtesy of SUBARU OF AMERICA, INC.
Lift up the vehicle.
Remove the bolt which secures the CVTF cooler pipe to the transmission, and move the CVTF cooler pipe to the left side of the transmission.

Fig 3: Locating CVTF Cooler Pipe Bolt
Courtesy of SUBARU OF AMERICA, INC.
Remove the nut at the bottom of the starter.

Fig 4: Locating Nut At Bottom Of Starter
Courtesy of SUBARU OF AMERICA, INC.
Lower the vehicle.
Remove the bolt at the top of the starter and remove the starter from the transmission.

Fig 5: Locating Bolt At Top Of Starter

Courtesy of SUBARU OF AMERICA, INC.