Turbo Model

Remove the clip (A), lift the front of the collector cover in the direction of arrow, and then remove the collector cover.
1. Remove the clip (A).
2. Hold the shaded area (B) by hand and carefully pull the RH side (C) upward.
3. Hold the shaded area (D) by hand and carefully pull the LH side (E) upward.
Fig 1: Removing Collector Cover
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the ground cable from battery.
Remove the brake booster vacuum pump. Ref. to BRAKE > Brake Vacuum Pump > REMOVAL .
Remove the V-belts. Ref. to MECHANICAL(H4DOTC) > V-belt > V-BELT .
Remove the collector cover bracket.

Fig 2: Locating Collector Cover Bracket Bolts
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the connector (A) and terminal (B) from the generator.

Fig 3: Identifying Connector And Terminal Of Generator
Courtesy of SUBARU OF AMERICA, INC.
Remove the generator from the generator bracket.

Fig 4: Locating Generator Bracket Bolt
Courtesy of SUBARU OF AMERICA, INC.
Remove the V-belt tensioner from the generator bracket. Ref. to MECHANICAL (H4DOTC) > V-belt > V-BELT TENSIONER ASSEMBLY .
Remove the generator bracket from the engine.

Fig 5: Locating Engine Generator Bracket Bolts

Courtesy of SUBARU OF AMERICA, INC.