LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2016 >> Forester 2.5i, Eng CD FB25BA, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 87 (Brake System) >> Stop Light Switch >> Removal

Stop Light Switch: Removal

WARNING: This page is about a different car, the 2016 Subaru Impreza and 2016 Subaru Crosstrek. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Before handling the airbag system components, always refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". < Ref. to CAUTION , General Description. >
  1. Disconnect the ground cable from battery and wait for at least 60 seconds before starting work. < Ref. to BATTERY , NOTE, Note. >
    NOTE: For the 12 volt engine restart battery of HEV model, disconnect the ground terminal from 12V engine restart battery sensor.
  2. Remove the cover assembly - instrument panel LWR driver. < Ref. to REMOVAL , Instrument Panel Lower Cover. >
  3. Remove the knee airbag module. < Ref. to REMOVAL , Knee Airbag Module. >
  4. Remove the stop light switch.
    1. Disconnect the stop light switch connector.
    2. Remove the stop light switch by turning it counterclockwise.
      Fig 1: Removing Stop Light Switch
      G08314881Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals