Headlight Bulb: Installation

WARNING: This page is about a different car, the 2016 Subaru Impreza and 2016 Subaru Crosstrek. However, it is still accessible from the selected car via links, so may be relevant.

Install each part in the reverse order of removal.
When performing the work of HID type low beam RH, secure the flange section of the bumper face - front to the bracket - front bumper side.
CAUTION: Install so that the front end of the under cover (b) comes inside the bumper face - front (a), and the front end of the mud guard (c) comes outside the bumper face - front (a).

Fig 1: Caution For Installing Under Cover
Courtesy of SUBARU OF AMERICA, INC.

Tightening torque:

Light assembly - head: 7.5 N.m (0.76 kgf-m, 5.5 ft-lb)
When performing the work of HID type low beam RH, adjust the fog light beam. (Model with fog light) < Ref. to FOG LIGHT AIMING , ADJUSTMENT, Front Fog Light Assembly. >