Malfunction Indicator Light Does Not Go Off

TROUBLE SYMPTOM: 

Although malfunction indicator light comes on when the engine runs, DTC is not shown on the Subaru Select Monitor or general scan tool display.

1. CHECK DTC  .

   Is DTC of engine or LAN system displayed? Ref. to ENGINE (DIAGNOSTICS) (H4DO) > Read Diagnostic Trouble Code (DTC) >  OPERATION   .

   Yes: Check the appropriate DTC using the "List of Diagnostic Trouble Code (DTC)". Ref. to ENGINE (DIAGNOSTICS) (H4DO) >  List of Diagnostic Trouble Code (DTC)   . Ref. to LAN SYSTEM (DIAGNOSTICS) >  LIST OF DIAGNOSTIC TROUBLE CODE (DTC)  .

   No: Check the combination meter system. Ref. to INSTRUMENTATION/DRIVER INFO (DIAGNOSTICS) >  BASIC DIAGNOSTIC PROCEDURE  .