Rear Height Sensor: Installation

WARNING: This page is about a different car, the 2016 Subaru Impreza and 2016 Subaru Crosstrek. However, it is still accessible from the selected car via links, so may be relevant.

Install each part in the reverse order of removal.
Tightening torque:

Sensor assembly - headlight beam leveler: 7.5 N.m (0.76 kgf-m, 5.5 ft-lb)

Rear wheel: Except for C4 model

120 N.m (12.24 kgf-m, 88.5 ft-lb)

Rear wheel: C4 model

100 N.m (10.20 kgf-m, 73.8 ft-lb)
Perform reinitialization of the sensor assembly - headlight beam leveler. < Ref. to REINITIALIZATION , PROCEDURE, Auto Headlight Beam Leveler System. >
NOTE: When replacing the sensor assembly - headlight beam leveler with a new part, perform the initialization. < Ref. to INITIALIZATION , PROCEDURE, Auto Headlight Beam Leveler System. >