Rear Height Sensor: Installation

WARNING: This page is about a different car, the 2017 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Do not apply impact to the sensor assembly - headlight beam leveler or forcibly move the arm. Doing so may cause sensor damage and malfunction.

Install each part in the reverse order of removal.
Tightening torque:

Sensor assembly - headlight beam leveler: 7.5 N.m (0.76 kgf-m, 5.5 ft-lb)

Rear wheel: 120 N.m (12.24 kgf-m, 88.5 ft-lb)
Connect the battery ground terminal. Ref. to NOTE>NOTE>BATTERY .
Perform reinitialization of the sensor assembly - headlight beam leveler. Ref. to LIGHTING SYSTEM>Auto Headlight Beam Leveler System>PROCEDURE>REINITIALIZATION .
NOTE: When replacing the sensor assembly - headlight beam leveler with a new part, perform the initialization. Ref. to LIGHTING SYSTEM>Auto Headlight Beam Leveler System>PROCEDURE>INITIALIZATION .