Check Relay

1. Remove the seat heater relay from the relay holder.
2. Measure the resistance between seat heater relay terminals.

   Preparation tool:

   Circuit tester

   Terminal No.	Inspection conditions	Standard	Circuit
   6 - 7	Always	1 MΩ or more
   6 - 7	Apply battery voltage 7 6 between terminals 8 and 9.	Less than 1 Ω

Does the resistance indicate the standard value?

Yes: The relay is normal.

No: Replace the seat heater relay if the result is not within the standard value. Ref. to SEATS > Seat Heater System > SEAT HEATER RELAY AND FUSE .