LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2016 >> Forester 2.0XT Premium >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Continuously Variable Transmission (Tr690) >> Intermediate Case >> Removal

Intermediate Case: Removal

  1. Remove the transmission assembly from vehicle body. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION(TR690)>Automatic Transmission Assembly>  REMOVAL   .
  2. Remove the extension case. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION(TR690) >Extension Case>  REMOVAL   .
  3. Remove the parking pawl. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION(TR690) >Parking Pawl>  REMOVAL   .
  4. Remove the rear drive shaft. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION(TR690) >Rear Drive Shaft>  REMOVAL   .
  5. Remove the transfer clutch assembly. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION(TR690)>Transfer Clutch>  REMOVAL   .
  6. Remove the transfer reduction driven gear assembly. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION(TR690)>Transfer Reduction Driven Gear>  REMOVAL   .
  7. Remove the intermediate case.
    NOTE:
    • The total number of intermediate case mounting bolts is 14.
    • Inside the transmission is a single bolt (arrowed).
    Fig 1: Locating Intermediate Case Bolts
    G09482108Courtesy of SUBARU OF AMERICA, INC.
  8. Remove the CVTF filter.
    Fig 2: Identifying CVTF Filter And Intermediate Case Side O-Rings
    G09482109Courtesy of SUBARU OF AMERICA, INC.
  9. Remove the O-ring from the transmission case.
Fig 3: Locating O-Ring Of Transmission Case
G06654544Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals