LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2016 >> Forester 2.0XT Premium >> Repair and Diagnosis >> External Pages >> Different car >> Section 85 (Entertainment System) >> Rearview Camera System >> Removal >> 5 Door Model/CROSSTREK Model

5 Door Model/CROSSTREK Model

WARNING: This page is about a different car, the 2016 Subaru Impreza and 2016 Subaru Crosstrek. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from battery. < Ref. to BATTERY , NOTE, Note. >
    NOTE: For the 12 volt engine restart battery of HEV model, disconnect the ground terminal from 12V engine restart battery sensor.
  2. Remove the trim panel - rear gate. < Ref. to REMOVAL , Rear Gate Trim. >
  3. Remove the arm assembly - rear wiper. < Ref. to REMOVAL , Rear Wiper Arm. >
  4. Remove the motor assembly - rear wiper. < Ref. to REMOVAL , Rear Wiper Motor. >
  5. Remove the garnish assembly - rear gate. < Ref. to REMOVAL , Rear Gate Garnish. >
  6. Remove the rearview camera assembly.
    CAUTION: Do not drop or apply any impact to the rearview camera because it is a precision equipment.
    1. Disconnect the rearview camera connector.
    2. Disconnect the claws and then remove the rearview camera assembly.
      Fig 1: Locating Rearview Camera Assembly Claws
      G10319559Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals