Light Control Sensor: Removal

WARNING: This page is about a different car, the 2016 Subaru Impreza and 2016 Subaru Crosstrek. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the ground cable from battery. < Ref. to BATTERY , NOTE, Note. >
NOTE: For the 12 volt engine restart battery of HEV model, disconnect the ground terminal from 12V engine restart battery sensor.
Remove the sensor - automatic light.
CAUTION: Be careful not to damage the sensors and interior trims when removing.
1. Release the connector and claws, and remove the grille front defroster.
  
  Fig 1: Identifying Front Defroster Grille Claws And Connector
  Courtesy of SUBARU OF AMERICA, INC.
2. Release the claws, and then remove the sensor - automatic light from the grille front defroster.
  
  Fig 2: Removing Sensor - Automatic Light From Grille Front Defroster
  Courtesy of SUBARU OF AMERICA, INC.