Auto Headlight Beam Leveler Control Module: Installation
WARNING: This page is about a different car, the 2017 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Before handling the airbag system components, always refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Ref. to AIRBAG SYSTEM>General Description>CAUTION
.
- Install each part in the reverse order of removal.
Tightening torque:
Relay & fuse box: 7.5 N.m (0.76 kgf-m, 5.5 ft-lb)
- Connect the battery ground terminal. Ref. to NOTE>NOTE>BATTERY
.NOTE: When the auto headlight beam leveler control module is removed, perform initialization or reinitialization. Ref. to LIGHTING SYSTEM>Auto Headlight Beam Leveler System>PROCEDURE .