Read Current Data: List
- Combination meter
Items to be displayed Unit of measure Content Note Power on trip number Time Time stamp information - Power on supply system - Time stamp information - past time after Power on ms Time stamp information - Fuel sensing value Ω Fuel sensor value display - External air temperature sensing value °C External temperature sensor value display - External air temperature indication value °C Calculated value of external temperature for indication - Vehicle speed data km/h (MPH) Vehicle speed value detected by meter - Engine speed rpm Engine speed value detected by meter - Drivers seat seat-belt wearing state - Displays ON/OFF - Passenger seat seat-belt wearing state - Displays ON/OFF - Rear seat right seat-belt wearing state - Displays ON/OFF - Rear seat center seat-belt wearing state - Displays ON/OFF - Rear seat left seat-belt wearing state - Displays ON/OFF - - MFD
| Items to be displayed | Unit of measure | Content | Note |
|---|---|---|---|
| MFD hardware fail flag | No occurrence/MFD malfunction | MFD abnormal status | - |
| MFD U-ART communication error flag | No occurrence/MFD U-ART malfunction | - | |
| MFD CAN communication error flag | No occurrence/MFD CAN malfunction | - | |
| MFD destination abnormal flag | No occurrence/MFD improper destination | - | |
| MFD failure information | No failure High speed CAN error counter failure High speed CAN bus OFF detected High speed CAN data error High speed CAN data not received UART data error UART data not received IGN line open System micro computer malfunction GERDA malfunction |
- | |
| Birthday1 setting M | - | Birthday setting value | - |
| Birthday1 setting D | - | - | |
| Birthday2 setting M | - | Birthday setting value | - |
| Birthday2 setting D | - | - | |
| Anniversary1 setting M | - | Anniversary setting value | - |
| Anniversary1 setting D | - | - | |
| Anniversary2 setting M | - | Anniversary setting value | - |
| Anniversary2setting D | - | - | |
| Driving record1 setting Yard | - | Driving record 1 setting value | - |
| Driving record1 setting Time | - | - | |
| Driving record1setting fuel cons. Ave. | - | - | |
| Driving record1 setting M | - | - | |
| Driving record1 setting D | - | - | |
| Driving record2 setting DIS | - | Driving record 2 setting value | - |
| Driving record2 setting Time | - | - | |
| Driving record2setting fuel cons. Ave. | - | - | |
| Driving record2 setting M | - | - | |
| Driving record2 setting D | - | - | |
| Clock/OFF setting | OFF Ambient temperature + analogue clock Ambient temperature + digital clock |
Clock display setting | - |
| Engine oil maintenance setting Y | - | Oil maintenance setting value | - |
| Engine oil maintenance setting M | - | - | |
| Engine oil maintenance setting D | - | - | |
| Engine oil maintenance setting meter | - | - | |
| Oil filter maintenance setting Y | - | Oil filter maintenance setting value | - |
| Oil filter maintenance setting M | - | - | |
| Oil filter maintenance setting D | - | - | |
| Oil filter maintenance setting meter | - | - | |
| Tire maintenance setting Y | - | Tire maintenance setting value | - |
| Tire maintenance setting M | - | - | |
| Tire maintenance setting D | - | - | |
| Tire maintenance setting meter | - | - | |
| Maintenance schedule Y | - | Periodic inspection setting value | - |
| Maintenance schedule M | - | - | |
| Maintenance schedule D | - | - | |
| Maintenance schedule meter | - | - | |
| Sub-meter(left) setting NO1 | Display OFF Average speed ODO fuel economy Oil temperature Accelerator pedal opening angle Trip time Trip distance Trip fuel economy |
Meter display setting | - |
| Sub-meter(left) setting NO2 | Analogue display Digital display |
Meter display setting | - |
| Sub-meter(center) setting NO1 | Display OFF Average speed ODO fuel economy Accelerator pedal opening angle Trip time Trip distance Trip fuel economy Oil temperature |
Meter display setting | - |
| Sub-meter(center) setting NO2 | Analogue display Digital display |
Meter display setting | - |
| Sub-meter(right) setting NO1 | Display OFF Average speed ODO fuel economy Oil temperature Accelerator pedal opening angle Trip time Trip distance Trip fuel economy |
Meter display setting | - |
| Sub-meter(right) setting NO2 | Analogue display Digital display |
Meter display setting | - |
| MFD brightness setting NO1 | - | MFD setting | - |
| MFD brightness setting NO2 | - | MFD setting | - |
| MFD contrast setting NO1 | -5 - + 5 | MFD setting | - |
| MFD contrast setting NO2 | -5 - + 5 | MFD setting | - |
| ECO evaluation ON-OFF setting | OFF/ON | MFD setting | - |
| Info area setting | OFF Average fuel efficiency Momentary fuel economy Remaining cruising distance |
MFD setting | - |
| Menu language setting | (Individual language) | MFD setting | - |
| Buzzer volume setting | OFF Small Large |
MFD setting | - |
| Fuel cons. Setting | 00/OFF | MFD setting | - |
| Auto Start Stop interrupt display setting | OFF/ON | MFD setting | Not applicable |
| Welcome display ON-OFF setting | OFF/ON | MFD setting | - |
| Self check ON-OFF setting | OFF/ON | MFD setting | - |
NOTE:
For detailed operation procedures, refer to "PC application help for Subaru Select Monitor".