Push Button Ignition Switch: Removal

1. Remove the cover assembly - instrument panel LWR driver and the knee airbag module. Ref. to AIRBAG SYSTEM > Knee Airbag Module > REMOVAL .
2. Remove the push button ignition switch.
   1. Disconnect the connector, and remove the aspirator hose.
      Fig 1: Locating Aspirator Hose Connector

      Courtesy of SUBARU OF AMERICA, INC.
   2. Release the claws, and then remove the panel - switch.
   3. Release the claws, and then remove the push button ignition switch from the panel - switch.

Fig 2: Locating Push Button Ignition Switch Claws

Courtesy of SUBARU OF AMERICA, INC.