Multi-function Display (MFD): Installation

CAUTION:

Make sure the electrical connector is connected securely.
Make sure that the multi-function display operates normally.
After installing the center grille assembly, check that the air vent grille of the center grille assembly is inserted correctly into the air vent duct.
When the multi-function display has been replaced, perform the following operations.
- Be sure to reset the ODO fuel economy value of the multi-function display (MFD). Ref. to INSTRUMENTATION/DRIVER INFO > Multi-function Display (MFD) System > ODO FUEL ECONOMY VALUE RESET (HIGH GRADE TYPE ONLY) .
- Be sure to correction the lifetime fuel economy value of the multi-function display (MFD). Ref. to INSTRUMENTATION/DRIVER INFO>Multi-function Display (MFD) System > DIAGNOSTIC MODE (HIGH GRADE TYPE ONLY) .

Install each part in the reverse order of removal.