LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2016 >> Forester 2.0XT Premium >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Security And Locks >> Push Button Start System >> Inspection >> Ignition/Acc Change Function Check

Ignition/Acc Change Function Check

  1. Check push button ignition switch function
    1. Check the power supply change control through push button ignition switch, brake pedal, clutch pedal operation, and shift position.
    • CVT model
    Shift lever position Brake pedal operation Push button ignition switch operation
    P Released Repeat Ignition OFF → ACC ON → Ignition ON → Ignition OFF
    P Released Engine running → Ignition OFF
    P Depressed Ignition OFF → Engine started
    P Depressed ACC ON → Engine started
    P Depressed Ignition ON → Engine started
    P Depressed Engine running → Ignition OFF
    N Released Repeat Ignition OFF → ACC ON → Ignition ON → ACC ON
    N Released Engine running → ACC ON
    N Depressed Ignition OFF → Engine started
    N Depressed ACC ON → Engine started
    N Depressed Ignition ON → Engine started
    N Depressed Engine running → ACC ON
    Other than P or N Released Repeat Ignition OFF → ACC ON → Ignition ON → ACC ON
    Other than P or N Released Engine running → ACC ON
    Other than P or N Depressed Ignition OFF → Ignition ON
    Other than P or N Depressed ACC ON → Ignition ON
    Other than P or N Depressed Engine running → ACC ON
  2. Check power status display
    1. Check the power indicator display of the push button ignition switch.
      NOTE: *1: Key collation is normal, and the stop light switch (CVT) or clutch switch (MT) is ON.
      *2: For CVT models, while the select lever button is being pressed, the indicator does not illuminate in green even if the select lever is in P range.

      Indicator display

Push button ignition switch status Indicator lighting status
Ignition OFF (except for condition *1) Light OFF
ACC ON (except for condition *1) Orange light
Ignition ON (except for condition *1) Orange light
Engine start standby (*1) Green light (*2)
After engine is started Light OFF
NOTE: The indicator blinks if any of the following malfunctions are detected.
Detected malfunction Indicator lighting status
Steering lock stuck Green blinking
Clutch switch failure Orange blinking
Steering lock CM internal malfunction Orange blinking
Keyless access CM internal malfunction Orange blinking
Vehicle speed signal malfunction Orange blinking