ID Code Box: Installation

CAUTION: Registration of the immobilizer is necessary when a immobilizer-related control module has been replaced. For detailed operation procedure, refer to the "REGISTRATION MANUAL FOR IMMOBILIZER".

Install each part in the reverse order of removal.

NOTE: Refer to "INSTALLATION" of "Heater and Cooling Unit Assembly". Ref. to HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > Heater and Cooling Unit > -- > INSTALLATION .

Tightening torque:

ID code box: 7.5 N.m (0.76 kgf-m, 5.5 ft-lb)