LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2016 >> Crosstrek Hybrid >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System (Hybrid) >> Oil Control Solenoid >> Removal >> Intake Side

Intake Side

  1. Disconnect the ground cable from battery. < Ref. to BATTERY , NOTE, Note. >
    NOTE: For the 12 volt engine restart battery, disconnect the ground terminal from 12V engine restart battery sensor.
  2. Remove the air intake duct. (RH side only) < Ref. to REMOVAL , Air Intake Duct. >
  3. Remove the reservoir tank. (LH side only) < Ref. to REMOVAL , Reservoir Tank. >
  4. Disconnect the connector (A) from the oil control solenoid, and remove the oil control solenoid from the chain cover.
    • RH side
      Fig 1: Locating Oil Control Solenoid Bolts (RH Side)
      G09487123Courtesy of SUBARU OF AMERICA, INC.
    • LH side
      Fig 2: Locating Oil Control Solenoid Bolts (LH Side)
      G08315400Courtesy of SUBARU OF AMERICA, INC.