LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2016 >> Crosstrek Hybrid >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System (Hybrid) >> Electronic Throttle Control Relay >> Removal

Electronic Throttle Control Relay: Removal

  1. Disconnect the ground cable from battery. < Ref. to BATTERY , NOTE, Note. >
    NOTE: For the 12 volt engine restart battery, disconnect the ground terminal from 12V engine restart battery sensor.
  2. Remove the instrument panel lower cover. < Ref. to REMOVAL , Instrument Panel Lower Cover. >
  3. Remove the bolts and nuts securing the fuse block and move down the fuse block.
    Fig 1: Locating Fuse Block Nuts And Bolts
    G09475594Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the electronic throttle control relay from the relay block.
    Fig 2: Locating Electronic Throttle Control Relay
    G09475599Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals