LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2016 >> Crosstrek Base >> Repair and Diagnosis >> Suspension >> Front Suspension >> Wheel Alignment >> Inspection >> Camber

Wheel Alignment: Inspection: Camber

  1. Place the front wheel on the turning radius gauge.
    NOTE: Make sure the ground contact surfaces of the front and rear wheels are at the same height.
  2. Set the adapter into the center of wheel, and then set the wheel alignment gauge.
    Fig 1: Checking Front Wheel Camber
    G10323224
  3. Measure the camber angle in accordance with the operation manual for wheel alignment gauge.
    Model Tire size Camber (difference between RH and LH 45' or less)
    Impreza model P195/65R15
    P205/55R16
    P205/50R17    		 -0°20'±0°45'
    Crosstrek model P225/55R17
    225/55R17    		 0°10'±0°45'
scientia non olet · About LEMON Manuals