Check Each Connection

WARNING: This page is about a different car, the 2015 Subaru XV Crosstrek and 2015 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: For models with 7 inch display, refer to Navigation System". <Ref. to CHECK EACH CONNECTION , INSPECTION, Navigation System.>

Turn the ignition switch to ACC.
(a) Press the button to display the Audio OFF screen.
Touch the screen order from (b) to (e)

Fig 1: Identifying Each Connection Button
Courtesy of SUBARU OF AMERICA, INC.

NOTE: Pressing the button (a) or turning the ignition switch from the OFF to ACC position can exit the diagnostic mode.
(Line Diag) screen is displayed.
Check the connection status with the {Connectivity Check} in the {Line Diag} screen.

Fig 2: Identifying Line Diag Screen
Courtesy of SUBARU OF AMERICA, INC.

OK: Each connection device is connected properly.

NG: No connection or abnormal connection is detected.

NOTE: Check the external connection terminals (USB and AUX) by connecting a memory for check or pin jack.
Check the connection status of the connector. If there are no problems, the connection devices or unit could be faulty.