SRF OFF Switch: Inspection
WARNING: This page is about a different car, the 2015 Subaru XV Crosstrek and 2015 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
- Measure the resistance between connector terminals.
Preparation tool:
Circuit tester
Terminal No. Inspection conditions Standard 2 - 3 OFF 1 MΩ or more ON Less than 1 Ω - Apply battery voltage between the connector terminals to check lighting condition of illumination inside the switch.
Terminal No. Inspection conditions Specification 1 (+) - 4 (-) Apply battery voltage Light ON - Replace the SRF OFF switch if the inspection result is not within the standard value.