LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2016 >> Crosstrek Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Lighting System) >> Hazard Switch >> Removal

Hazard Switch: Removal

WARNING: This page is about a different car, the 2015 Subaru XV Crosstrek and 2015 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from battery. < Ref. to BATTERY , NOTE, Note.>
    NOTE: For the 12 volt engine restart battery of HEV model, disconnect the ground terminal from 12V engine restart battery sensor.
  2. Remove the center grille assembly. <Ref. to CENTER GRILLE ASSEMBLY , REMOVAL, Air Vent Grille.>
  3. Release the claws, and remove the switch - hazard from the panel center assembly.
    Fig 1: Removing Switch - Hazard From Panel Center Assembly
    G08315047Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals