Driver's Airbag Module Assembly
WARNING: This page is about a different car, the 2015 Subaru XV Crosstrek and 2015 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
- Frontal collision (driver's airbag module assembly activated)
- Replace the following parts with new ones.
- Airbag control module
- Driver's airbag module
- Knee airbag module
- Passenger's airbag module
- Curtain airbag module (both sides/if deployed)
- Seat belt pretensioner (right and left)
- Lap seat belt pretensioner (XV model - passenger's side only)
- Front sub sensor (right and left)
- Column assembly - steering
- Trim panel - roof assembly (if the curtain airbag is deployed)
- Trim panel of each pillar (if the curtain airbag is deployed)
- Visually inspect the following items and replace any damaged part with a new one.
- Steering wheel
- Beam COMPL - steering
- Instrument panel harness and connector on body side
- Replace the following parts with new ones.
- Frontal collision (driver's airbag module not activated)
Visually inspect the following items and replace any damaged or cracked part with a new one.
Specially inspect the damage of airbag module body, mounting bracket and harness connector.
- Driver's airbag module
- Knee airbag module
- Passenger's airbag module
- Seat belt pretensioner (right and left)
- Lap seat belt pretensioner (XV model - passenger's side only)
- Front sub sensor (right and left)
- Instrument panel assembly (because it is integrated with passenger's airbag module)
- No frontal collision
Visually inspect the airbag modules for damage or contamination and replace any faulty part with a new one.