Front Door Impact Sensor: Installation

WARNING: This page is about a different car, the 2015 Subaru XV Crosstrek and 2015 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Do not reuse the bolt and nut.
Always replace with the specified new bolts and nuts.

Before installation, inspect the following items and replace any faulty part with a new part.
- The front door impact sensor or connector is damaged.
- Inner panel area of the panel assembly - front door is deformed.
- Side airbag module has been activated.
  Tightening torque:
  
  Front door impact sensor: 7.5 N.m (0.76 kgf-m, 5.5 ft-lb)
Install each part in the reverse order of removal.