LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2016 >> Crosstrek Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 44 (Airbag System) >> Driver's Airbag Module >> Installation

Driver's Airbag Module: Installation

WARNING: This page is about a different car, the 2015 Subaru XV Crosstrek and 2015 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Refer to "CAUTION" of "General Description" before handling the airbag module. < Ref. to CAUTION , General Description.>
  • Do not allow harness and connectors to interfere or get tangled up with other parts.
  1. Before installation, inspect the following items and replace any faulty part with a new one.
    • Airbag module is cracked or deformed.
    • Harness and/or connector is cracked, deformed or open.
    • Harness wire is exposed.
    • The steering wheel is in the way, making it difficult to install the airbag module.
    • The clearance between the driver's airbag module and steering wheel is not constant.
  2. Install each part in the reverse order of removal.
    CAUTION: Make sure that the snap pin is set inside the guide.
scientia non olet · About LEMON Manuals