LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2016 >> Crosstrek Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 39 (Speed Control Systems) >> Accelerator Pedal >> Inspection >> Check Accelerator Pedal Sensor Area (Method With Circuit Tester)

Check Accelerator Pedal Sensor Area (Method With Circuit Tester)

WARNING: This page is about a different car, the 2015 Subaru XV Crosstrek and 2015 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the glove box. < Ref. to REMOVAL , Glove Box.>
  2. Turn the ignition switch to ON. (engine OFF)
  3. Measure the voltage between ECM connector terminals.
    Fig 1: Identifying ECM Connectors
    G08315329Courtesy of SUBARU OF AMERICA, INC.

    Main sensor side

    Fig 2: Measuring Voltage Between ECM Connector Terminals (Main Sensor Side)
    G08315854Courtesy of SUBARU OF AMERICA, INC.

    Sub sensor side

    Fig 3: Measuring Voltage Between ECM Connector Terminals (Sub Sensor Side)
    G09486939Courtesy of SUBARU OF AMERICA, INC.
    Accelerator pedal sensor Accelerator pedal Terminal No. Standard
    Main Not depressed (full closed) 23 (+) and 29 (-) 0.4 - 1.0 V
    Depressed (full opened) 2.4 - 3.7 V
    Sub Not depressed (full closed) 31 (+) and 30 (-) 0.3 - 1.1 V
    Depressed (full opened) 2.3 - 3.8 V
  4. After inspection, install the related parts in the reverse order of removal.
scientia non olet · About LEMON Manuals