LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2016 >> Crosstrek Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Security And Locks) >> Key Lock Cylinders >> Replacement >> Front Door

Front Door

WARNING: This page is about a different car, the 2015 Subaru XV Crosstrek and 2015 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the glass assembly - front door to the top position.
  2. Remove the cover - handle front outer.

    Preparation tool: TORX® T30 

    1. Remove the plug at the rear end of the panel assembly - front door.
    2. Loosen the TORX® bolt and remove the cover - handle front outer.
      Fig 1: Removing Plug At Rear End Of Panel Assembly
      G06653885Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the key cylinder (B) from the cover - handle front outer (A), and replace the key cylinder.
    Fig 2: Identifying Key Cylinder From Cover - Handle Front Outer
    G08319273Courtesy of SUBARU OF AMERICA, INC.
  4. Install each part in the reverse order of removal.
    CAUTION: When installing the cover - handle front outer on driver's side, make sure that the key cylinder shaft is correctly inserted into the latch & actuator assembly - front.

    Tightening torque: Refer to "COMPONENT" of "General Description". < Ref. to  DOOR LOCK ASSEMBLY  , COMPONENT, General Description.> 

scientia non olet · About LEMON Manuals