Master Cylinder: Installation

WARNING: This page is about a different car, the 2015 Subaru XV Crosstrek and 2015 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.

Replace the seal sub assembly for the master cylinder assembly with a new part.
CAUTION: Be careful not to install the seal sub assembly in the wrong location.

Fig 1: Identifying Seal Sub Assembly To Surface Area
Courtesy of SUBARU OF AMERICA, INC.
Install each part in the reverse order of removal.
Tightening torque:

Master cylinder assembly: 13 N.m (1.33 kgf-m, 9.6 ft-lb)

Brake pipe flare nut: 19 N.m (1.94 kgf-m, 14.0 ft-lb)
Bleed air from the brake system. < Ref. to PROCEDURE , Air Bleeding.>