LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2016 >> Crosstrek Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Brake System) >> Master Cylinder >> Disassembly

Master Cylinder: Disassembly

WARNING: This page is about a different car, the 2015 Subaru XV Crosstrek and 2015 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the reservoir tank.
    CAUTION: Be careful not to tighten a vise excessively.
    1. Place the master cylinder assembly between aluminum plates and fix it on a vise.
    2. Drive out the pin using a punch and a hammer to remove the reservoir tank.
    Fig 1: Removing Reservoir Tank
    G00548481Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the seal from the cylinder body assembly.
scientia non olet · About LEMON Manuals