Rear Differential Front Member: Installation

WARNING: This page is about a different car, the 2015 Subaru XV Crosstrek and 2015 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.

Install the rear differential front member, and temporarily attach and tighten a new self-locking nut.
Remove the transmission jack.

Fig 1: Identifying Rear Differential Front Member And Mounting Screw
Courtesy of SUBARU OF AMERICA, INC.
Tighten the self-locking nut.
Tightening torque:

T1: 50 N.m (5.1 kgf-m, 36.9 ft-lb)

T2: 110 N.m (11.2 kgf-m, 81.1 ft-lb)

Fig 2: Identifying Rear Differential Front Member Mounting Screw Tightening Torque
Courtesy of SUBARU OF AMERICA, INC.