LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2016 >> Crosstrek Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System (Except Hybrid) >> Crankshaft Position Sensor >> Inspection >> Crankshaft Position Sensor (Method With Oscilloscope)

Crankshaft Position Sensor (Method With Oscilloscope)

  1. Prepare an oscilloscope.
  2. Remove the glove box. < Ref. to REMOVAL , Glove Box. >
  3. Connect the probe to ECM connector.
    Fig 1: Locating ECM Connector
    G09475469Courtesy of SUBARU OF AMERICA, INC.
    Fig 2: Connecting Probe To ECM Connector
    G10318290Courtesy of SUBARU OF AMERICA, INC.
    Terminal No. Probe
    16 +
    27 -
  4. Start the engine and let it idle.
  5. Check the waveforms and voltage.
    NOTE: For waveform and voltage, refer to "Engine Control Module (ECM) I/O Signal". < Ref. to ELECTRICAL SPECIFICATION , Engine Control Module (ECM) I/O Signal. >
  6. After inspection, install the related parts in the reverse order of removal.
scientia non olet · About LEMON Manuals