Engine Control Computer (FA20): Removal

WARNING: This page is about a different car, the 2014 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.

Disconnection of battery ground terminal (Refer to WORKING PRECAUTIONS AND NOTES )
Removal of instrument side panel RH (Refer to DISASSEMBLY )
Removal of glove compartment door assembly (Refer to DISASSEMBLY )
Removal of control module relay assembly (without smart entry) (Refer to KEY LOCK UNIT )
Removal of engine control computer
1. Disconnect 4 connectors for engine control computer.
  
  Fig 1: Locating Engine Control Computer Connectors
  Courtesy of SUBARU OF AMERICA, INC.
2. Remove 2 nuts, and remove the engine control computer.
  
  Fig 2: Locating Engine Control Computer Mounting Nuts
  Courtesy of SUBARU OF AMERICA, INC.
Removal of engine control computer bracket
1. Release 2 claws, and remove the engine control computer bracket.
  
  Fig 3: Identifying Engine Control Computer Bracket Claws
  Courtesy of SUBARU OF AMERICA, INC.